• Module name: 400W boost constant current module
• Module properties: Non-isolated boost module (BOOST)
• Input voltage: DC8.5V-50V
• Input current: 15A (MAX) If it exceeds 8A, please increase heat dissipation
• Quiet working current: 10mA (When the output voltage is increased from 12V to 20V, the higher the output voltage, the higher the static current will be)
• Output voltage: 10-60V continuously adjustable (the default output is 19V. If you need other voltages, please inform the shopkeeper.) 12-80V fixed output (for bulk customers)
• Output current: 12A MAX. If it exceeds 7A, please increase heat dissipation (related to the input and output voltage difference. The larger the voltage difference, the smaller the output current)
• Constant current range: 0.2-12A
• Output power: = input voltage * 10A, such as: input 12V * 5A = 60W, input 24V * 5A = 120W, Input 36V*5A=180W, Input 48V*5A=240W,
• Working temperature: -40~+85 degrees (please increase heat dissipation when the ambient temperature is too high)
• Working frequency: 150KHz
• Conversion efficiency: Up to 96% (efficiency is related to input and output voltage, current and pressure difference)
• Overcurrent protection: Yes (when input exceeds 15A, the output voltage will be automatically reduced, with a certain range of error.)
• Input reverse protection: None, (If you need a higher reverse current, please connect a diode in series with the input)
• Installation method: 4 2.5mm screw holes
• Wiring method: Wiring output
• Module size: Length 67mm, width 48mm, height 28mm
• Module weight: 60g

Operation:

1. Output voltage/current adjustment method:

1. Adjust the “CV-ADJ” potentiometer to set the output voltage to the voltage value you need according to your battery or LED. For example, adjust the voltage of 10 strings of LEDs to 37V. (Counter-clockwise voltage increases, clockwise voltage decreases)

2. Adjust the “CC-ADJ” potentiometer counterclockwise for about 30 turns to set the output current to the minimum, connect the LED, and adjust the RV2 potentiometer to the current you need. For battery charging, discharge the battery, connect it to the output, and adjust RV2 to the current you need. (When charging, you must use a discharged battery to adjust it accurately, because the more power the battery has, the smaller the charging current.) (Counterclockwise current is adjusted to a smaller value, and clockwise current is adjusted to a larger value)

Please do not use short circuit to adjust the current. The circuit structure of the boost module cannot be adjusted by short circuit.

Applications:

1. DIY a voltage-stabilized power supply with 12V input and adjustable output of 12-50V.

2. Power your electronic devices and set the output value according to your system voltage.

3. As a car power supply, it can power your laptop, PDA or various digital products.

4. DIY a high-power laptop mobile power supply: equipped with a large-capacity 12V lithium battery pack, your laptop can be powered wherever you go.

5. Solar panel voltage stabilization.

6. Charge storage batteries, lithium batteries, etc.

7. Drive high-power LED lights.

What’s in the box:

x1 400W regulated module